Galvanized Chain Link Fabric

About gauges: The smaller the number, the heavier the fabric; henceforth 9ga. is heavier than 11ga. We recommend 11ga. for residential jobs and 9ga. for commercial jobs.Heavier gauges are not only stronger, but have a better finish; The heavier the gauge the longer it may be 'hot-dip galvanized' to prevent rust and corrosion.

About knuckles and barbs: Fence fabric is available two ways. Chain link fabric under 72" high is available with knuckles on both ends. Chain link fabric 72" and taller comes with knuckles on one end and barbs on the other end. (two barbs are formed when the chain link is twisted at one end, see illustration).

About mesh size: The galvanized fabric mesh for 11-1/2 gauge measures 2-1/4".  The 11 and 9 gauge galvanized mesh meaures 2". Mesh size is the measured distance between two parallel sides (see illustration)

Chain link is easily cut to size by removing one link.

KxK = Knuckle x Knuckle, chain link top and bottoms are bent over.
KxB or KxT = Knuckle x Barb or Knuckle x Twist, chain link is twisted at one end to form two barbs.

	Size (Mesh x Gauge x Height)	Ends
	2-1/4 x 11-1/2 x 36	KxK
	2-1/4 x 11-1/2 x 42	KxK
	2-1/4 x 11-1/2 x 48	KxK
	2-1/4 x 11-1/2 x 60	KxK
	2-1/4 x 11-1/2 x 72	KxB

Size column: Mesh size in inches x gauge of wire x height of fence in inches.
*Type: KxK = Knuckle end top and bottom, KxB = Knuckle end bottom / Barb end top